Steel Cutting Grade of Welding Tungsten Carbide Composite Rod

Product Description

Product Description

Tungsten Carbide Composite Rod

Steel Cutting Grades of Tungsten Carbide Composite Welding Rod, Special Tungsten Carbide Bar for Oil Industry Parts

After the welding rod is melted, it is welded to the part surface to enhance the wear resistance.
The tungsten carbide blocks with sharp edges and corners are knocked off from top grade of 100% virgin raw material, which holding superior hot- resistance and abrasion performance.
Therefore, our tungsten carbide composite rod providing longer life.

 

Technical parameters:
The sizes of diameter from 1-13.5mm are all available. The rod length can be customized on your request.
Like, 1/16" tungsten carbide grain rods, or 3/16" carbide rods. And the rods are all made of virgin tungsten carbide with the top hot-resistance and abrasion performance.
You can choose two items as follows, 
A: tungsten carbide + copper (Cu) a little yellow color
B: tungsten carbide + nickel (Ni) a light white color
Grain size measurements:

1	1.6-3.2mm
2	3.2-4.8mm
3	4.8-6.4mm
4	6.4-8.0mm
5	8.0-9.5mm
6	…

For the technical data, please refer to wolfram carbide grade YG8.
The hardness is above HRA 90, and the particles, which have the best wear resistance among hard alloys, are made of carbide top hammers.
Carbide top hammer, which is a key component of the ultra-high pressure and high temperature device to synthesize artificial diamond by static pressure method.
Most of the top hammers are made of tungsten drill series cemented carbide, which has high strength, wear resistance, good toughness, and thermal stability.

In stock and Producing Capacity:
In stock sizes diameter from 5-18mm * 330mm length.
Not only with huge stock, but also have very high producing capacity: 100 ton/month.
 
Packing Information:
The standard packing list will be:
Paper carton, about 25kg/carton, carton size: 61×49×12cm

 

Our Advantages

Advantages:

1,	Steel cutting grades of tungsten carbide
2,	Sharp, angular, and chunky fragments
3,	Made with high tensile brazing ally

Company Profile

Zhuzhou Sanxin cemented carbide products mainly include nozzles, bushings & sleeves, sealing rings, molds, inserts, mill rollers, and other customized components.
Cemented carbide is a composite hard alloy material that consists of refractory metal bonded together by a metallic binder through powder metallurgy.
High hardness, wear resistance, strength, and toughness are all its exceptional properties to be widely used in industrial parts and tools for most harsh and aggressive environments.
It is generally accepted that tungsten carbide and tungsten alloy best fit the definitions of cemented carbide, which is also well known as the name metal ceramic.

Machining capability of solid tungsten carbide parts:
Maximum Size: Φ85 * 1200mm
Minimum Size: Φ0.045 * 14mm